We dream of your happiness.

ANODIZING ALUMINUMMESPRODUCTS

PIKA Ｅ

High gloss Electrolytic Polishing agent
Electrolytic Polishing can achieve a gloss that cannot be obtained with Chemical Polishing.
25kg (14.4L) UN Poly container 16L
Deleterious Substances 2nd. Grade
UN number 3264 Guide Number of ERG 154

SMUT CLEAN

Low nitric acid concentration desmutting agent
Thanks to the action of the additive, smut that cannot be removed with nitric acid alone can be easily removed.
Nitric acid concentration can be reduced to 1/6 of conventional levels.
It is safe, environmentally friendly, speeds up desmatting, and reduces wastewater treatment costs.
<Application> Desmutting for various aluminum alloys
25kg (18.5L) UN Poly container 20L
Deleterious Substances 2nd. Grade
UN number 3264 Guide Number of ERG 154

CASTCLEAN

Desmutting agent for aluminum castings
Due to the action of the gas suppressant, the generation of fluorine gas and nitric acid gas is reduced, and the life of the liquid can be extended.
It has been changed from a Poisonous substance to a Deleterious substance.
<Applications> Desmutting and Si removal of various aluminum castings
25kg (16.7L) UN Poly container 20L
Deleterious Substances 2nd. Grade
UN number 3264 Guide Number of ERG 154

BUFFCLEAN

Buff powder remover
A chemical that removes buffing powder without reducing gloss. It is effective when used as a pre-treatment for Pika 1.
20kg (12.7L) Poly container 16L
Poisonous and Deleterious Not applicable
UN number 3264 Guide Number of ERG 154

SATEN R

Chemical satin finish agent
Creates a pearl-like, fine-grained, glossy satin finish.
This is an acidic etching agent based on acidic ammonium fluoride.
15kg cardboard (plastic bag)
Deleterious Substances 2nd. Grade
UN number 3260 Guide Number of ERG 154

SULFURIC ACID

98% purified concentrated sulfuric acid
In addition to 75% sulfuric acid, 50% sulfuric acid, we also handle 180g/L sulfuric acid, etc.
20kg (10.9L) UN Poly container 16L
Deleterious Substances 2nd. Grade
UN number 1830 Guide Number of ERG 157

NITRIC ACID

67.5% nitric acid
20kg (14.2L) UN Poly container 16L
Deleterious Substances 2nd. Grade
UN number 2031 Guide Number of ERG 157

SODIUM HYDROXIDE

Sodium hydroxide (granular)
25% liquid caustic, 48% liquid caustic, etc. are also available.
25kg craft bags
Deleterious Substances 2nd. Grade
UN number 1823 Guide Number of ERG 154

ALFLOCK

polymer flocculant
A polymer flocculant developed for treating wastewater containing phosphoric acid.

10kg　1kg×10　
Poisonous and Deleterious Not applicable

ALCATCH

Heavy metal treatment agent
A coagulation aid that removes heavy metals from anodizing wastewater. It also helps with nitrogen precipitation.
20kg Poly container 20L
Poisonous and Deleterious Not applicable

Processing chemicals for anodizing

We also prepare degreasing agents, etching agents, anodizing solutions, and adjust specially formulated solutions.
We have the necessary chemicals for anodizing, such as dyes and sealants.
We will propose the most suitable process and build your bath according to your company's wishes.

Equipment for anodizing

We have the equipment necessary for an anodizing factory, such as acid-resistant rubber (rubber bands), rubber gloves, boots, and aprons.

RAIKI CORPORATION

1-5-41 Aoyagi, Soka City, Saitama,Japan

TEL +81-48-933-1670
FAX +81-48-933-1677